An architect must thoroughly understand the building and operational codes to which his or her design must conform, so that he or she is not apt to omit any necessary requirements, or produce improper, conflicting, ambiguous, or confusing requirements. Architects must also understand the various methods available to the builder for building the client's structure, so that he or she can negotiate with the client to produce a best possible compromise of the results desired within explicit cost and time boundaries.
The idea of what constitutes a result desired varies among architects, as the architectural design values which underlie modern architecture differ both between the schools of thought which influence architecture and between individual practising architects.[2]
The practice of architecture is a business, in which technical knowledge, management skills, and an understanding of good business practice are as important as creative design. In practice, an architect accepts a commission from a client (an individual, a board of directors, a government agency or a corporation). This commission may involve the preparation of feasibility reports, building audits, the design of a single building, or the design of several buildings, structures and the spaces between them. Increasingly, the architect participates in the development of requirements the client wishes to have met in the building. Throughout the project, from planning to occupancy, the architect usually acts as the coordinator of a team of specialists (the "design team"). Structural, mechanical, and electrical engineers, as well as other specialists, are generally retained by the client or the architect. The architect must ensure that the work of all these different disciplines is coordinated and fits together in the overall design.
Working hours are typically over a standard work week, but when working to tight deadlines it is not uncommon for architects to work long hours, including evenings, weekends and all nighters. Architects are predominantly office-based, but their work includes frequent out-of-office visits with clients and to job sites.
Design role
Architects deal with various government jurisdictions on local and federal levels, regarding numerous regulations and building codes. The architect may need to comply with local planning and zoning requirements such as required setbacks, height limitations, parking requirements, transparency requirements (windows), land use and other requirements. In many established jurisdictions, design guidelines and historic preservation guidelines must be adhered to.
Architects also prepare technical documents filed for permits (such as development permits and building permits) which require compliance with building, seismic and various other federal and local regulations. The documents (construction drawings and specifications) are also used for pricing and, ultimately, actual construction.
Construction role
Architects typically put projects to tender on behalf of their clients, advise on the award of the project to a general contractor, and review the progress of the work during construction. They typically review subcontractor shop drawings, prepare and issue site instructions, and provide construction contract administration (see also Design-bid-build). In many jurisdictions, mandatory certification or assurance of the work is required.
Depending on the client's needs and the jurisdiction's requirements, the spectrum of the architect's services may be extensive (detailed document preparation and construction review) or less inclusive (such as allowing a contractor to exercise considerable design-build functions). With very large, complex projects, an independent construction manager is sometimes hired to assist in design and to manage construction. In the United Kingdom and other countries, a quantity surveyor is often part of the team to provide cost consulting.
Alternate practice and specializations
Recent decades have seen the rise of specializations within the profession. Many architects and architectural firms focus on certain project types (for example health care , retail, public housing, etc.), technological expertise or project delivery methods. Some architects specialize as building code, building envelope, sustainable design, historic preservation, accessibility and other forms of specialist consultants.
Many architects elect to move into real estate (property) development, corporate facilities planning, project management, construction management, interior design and other specialized roles.
Professional requirements
Canada
In Canada, architects are required to meet three common requirements for registration: education, experience, and examination. Educational requirements generally consist of an M.Arch. degree and are certified by the Canadian Architectural Certification Board (CACB). For degreed candidates, the experience requirement is typically the Intern Architect Program (IAP). The provincial associations of architects, by the authority granted under their respective provincial Architects Act, require that Interns gain a minimum of 5,600 hours of work experience. The fundamental purpose of the pre-registration/licensing employment period is to ensure that the Intern is provided with sufficient experience to meet the standards of practical skill and level of competence required to engage in the practice of architecture. This experience is diversified into four main categories and 16 sub-categories, and must be completed working under the direct supervision of a registered architect. At present, all jurisdictions use the Architect Registration Examination (ARE), a series of nine computerized exams administered by the National Council of Architectural Registration Boards (NCARB). As well, all jurisdictions except British Columbia recognize the Examination for Architects in Canada (ExAC), administered by the Pan Canadian ExAC Committee. Upon completion of the educational requirements, IAP, and examinations, one can apply for registration/license. An annual fee must be paid, and continuing education requirements met, in order to maintain a license to practice.
The Royal Architectural Institute of Canada (RAIC) was established in 1907 and is a voluntary national association representing more than 3,600 architects and Faculty and graduates of accredited Canadian Schools of Architecture.[4] The RAIC aims to be "the voice of Architecture and its practice in Canada". Members are permitted to use the suffix MRAIC after their names. The suffix FRAIC (Fellow of the RAIC) is used by members of the RAIC College of Fellows. Not all members of the RAIC hold accredited degrees in architecture, and not all Canadian architects are members of the RAIC.
United States
In the United States, people wishing to become licensed architects are required to meet the requirements of their respective state. Each state has a registration board to oversee that state's licensure laws. In 1919, the National Council of Architectural Registration Boards (NCARB) was created to ensure parity between the states' often conflicting rules. The registration boards of each of the 50 states (and 5 territories), are NCARB member boards.
Requirements vary between jurisdictions, and there are three common requirements for registration: education, experience and examination. About half of the States require a professional degree from a school accredited by the National Architectural Accrediting Board (NAAB) to satisfy their education requirement; this would be either a B.Arch or M.Arch degree. The experience requirement for degreed candidates is typically the Intern Development Program (IDP), a joint program of NCARB and the American Institute of Architects (AIA). IDP creates a framework to identify for the intern architect base skills and core-competencies. The intern architect needs to earn 700 training units (TUs) diversified into 16 categories; each TU is equivalent to 8 hours of experience working under the direct supervision of a licensed Architect. The states that waive the degree requirement typically require a full 10 years experience in combination with the I.D.P divesification requirements before the candidate is eligible to sit for the examination. California requires C-IDP (Comprehensive Intern Development Program) which builds upon the seat time requirement of IDP with the need to document learning having occurred. All jurisdictions use the Architect Registration Examination (ARE), a series of nine computerized exams administered by NCARB. The NCARB also has a certification for those architects meeting NCARB's model standard: NAAB degree, IDP and ARE passage. This certificate facilitates reciprocity between the member boards should an architect desire registration in a different jurisdiction. All architects licensed by their respective states have professional status as Registered Architects (RA).
Depending on the policies of the registration board for the state in question, it is sometimes possible to become licensed as an Architect in other ways: reciprocal licensure for over-seas architects and working under an architect as an intern for an extended period of time.
For degrees in the United States, Australia, Canada and the UK, see Bachelor of Architecture and Master of Architecture.
For schools in the US, see US Architecture Schools.
Professionals engaged in the design and supervision of construction projects prior to the 20th century were not necessarily trained in a separate architecture program in an academic setting. Instead, they usually carried the title of Master Builder, or surveyor, after serving a number of years as an apprentice (such as Sir Christopher Wren). The formal study of architecture in academic institutions played a pivotal role in the development of the profession as a whole, serving as a focal point for advances in architectural technology and theory.
Earnings
Earnings for architects range widely, depending on experience, and where and how they work. Salaries also vary depending on the size and location of the practice. Earnings have traditionally been dependent on the local economic conditions but, with rapid globalization, this is becoming less of a factor for larger international firms. Some architects become real estate (property) developers or specialized roles where they can earn a significantly higher income than the industry median.
Canada earnings
In 2005, a typical salary for those employed in the architecture category in Canada was $49,595 to $73,684 ($CDN). "Architecture" includes architects, architectural technologists, interior designers, landscape architects and structural technologists.
According to the 2005 Alberta Wage and Salary Survey, Albertans in the Architect occupational group, working part-time or full-time, earned from $31,000 to $114,700 a year. The average salary was $63,100 a year.
US earnings
According to the 2006–2007 Occupation Outlook Handbook published by the US Department of Labor, the median salary of architects was $62,960 with the middle 50% earning between $46,690 and $79,770. This was slightly above accountants (median income $50,770), college professors (median income $51,800) and on par with most branches of engineering (median income of roughly $60,000).
Intern architects typically earn between $35,000 and $58,000 depending on experience prior to licensure. Architects that have completed the internship period can expect an average starting salary of between $51,709 and $64,519. For 10 years' experience, the base compensation level increases significantly to an average range of $62,608–$79,919; that range reaches $72,678–$96,928 for architects with 15 years' experience.
Senior architects and partners typically have earnings that exceed $100,000 annually. It is not unusual for an officer or equity partner to earn a base salary of $235,000, with a bonus of $200,000. Due to the major stake in ownership that equity partners may have, they can earn incomes approaching, and occasionally surpassing, seven figures.
All text of this article available under the terms of the GNU Free Documentation License (see Copyrights for details).